Introducing the New EZ Port 280

The EZ Port line of personal watercraft (PWC) lifts by EZ Dock has been considered by many to be the best line of lifts on the market. Since launching the series in 1996, over time the ports have evolved to include adjustable rollers and self-centering split entry to make getting in and out of the water with your PWC effortless. EZ Dock even invented the in-line port system as a way to store multiple ports in a tight slip. After the recent release of the EZ Port VXP for smaller 2-seat PWC, EZ Dock went back to the drawing board to improve the design of the award winning EZ Port MAX 2i. Today we’re proud to introduce the EZ Port 280, the widest PWC Port on the market!

EZ Port in Action

EZ Port 280 Features:

The EZ Port 280 combines the best of both worlds: The strength and durability of EZ Dock combined with the ease of use of EZ Port. With a width of 6′-6″, the EZ Port 280 is 10″ wider than any other port EZ Dock offers. This allows for more stability and walk room for PWC enthusiasts. The EZ Port 280 is the perfect solution for anyone looking for a way to easily get in and out of the water while storing a PWC safely. With it’s adjustable rollers, the EZ Port 280 can be configured to match any shape or size of hull.

EZ Port 280:

  • Has an additional 10″ of width compared to an EZ Port MAX 2i
  • Makes launching a PWC as easy as rolling off into water
  • Built-in bow stop to prevent overshooting
  • Protects PWC from weather damage
  • Prevents marine growth from building up on hull protecting your investment
  • Features (10) adjustable rollers that can accommodate any PWC
  • Can be attached to any EZ Dock, existing floating dock, or stand alone.
  • Can be installed in any Marina
  • Easy to install
  • Available in Beige or Gray

What is the EZ Port 280 Price?

The EZ Port 280 will be available in the late summer of 2021. However, it is now available for pre-order! For more information about pricing and available contact your local dealer.

How to Choose the Right PWC Port

If you’re a new personal watercraft (PWC) or waterfront property owner, nothing beats a fun day riding around the lake during the summer. While riding around the lake is a blast, pulling the jet ski out of water is a tedious chore that nobody wants to do if they don’t have to. Fortunately, there’s a solution to storing your PWC that will leave it high and dry, and out of corrosive water. The EZ Port! The EZ Port series by EZ Dock is the market leader in PWC ports due to it’s ease of use, protection, and durability.

Why You Need A Jet Ski Port

Owning a lift for your personal watercraft is essential to protecting the investment value because it keeps the PWC in the original condition that it was in as the day you bought it. By taking a jet ski out of water after each use, you eliminate the long term problems that are associated with leaving a jet ski in the water. Over time a jet ski will get hull damage by rubbing and banging up against a dock when the wind picks up and the weather worsens. Water will also fade paint on the hull over time due to the acidity in unpurified water minerals. While both of these are cosmetic damage that can lead to a big problem later, they will decrease the value of the jet ski and make it look old quick. People want to keep their PWC shiny and new, and have it last a long time. Water will also damage the internal parts of a jet ski, causing them to rust and gunk up quick if constantly submerged. So a quick way to make your jet ski look old and not run right is to leave it in the water.

A PWC lift or jet ski port will suspend your jet ski out of water, allowing it to be safely stored in a dry location. There are many models of jet ski port on the market including standard crank lifts, foam-filled polyethylene ports, or even wooden lifts but none compare to the EZ Port series. With plenty of adjustable rollers, getting in and out of the water with an EZ Port is as simple as rolling on and sliding off.

How EZ Port Compares to Competition

While the market is full of competing PWC lifts, none offer the durability and ease-of-use as EZ Dock. There’s still EZ Ports from 25+ years ago in the water today! The two most common PWC lifts are stationary and floating. A stationary lift will sit in the water in a fixed location and typically requires a wheel to crank the PWC in and out of the water. Instead of spending time cranking, EZ Port owners are able to use the built-in adjustable rollers to pull on and slide off. EZ Ports face much more competition when compared against floating PWC lifts. A floating PWC lift rises and lowers with the water level, perfect for bodies of water with a lot of fluctuation.

The competition to the EZ Port all lacks a key feature in one way or another. For example, most PWC lift manufacturers also fill their product with marine foam. A foam-filled PWC port will hold up for a couple of years, but after a while they will start to get warped and the plastic will bubble. Those bubbles will fill with water, causing the port to slowly start to sink. Another negative factor of foam is the harm to the environment caused when the beads start to leak. EZ Ports are all hollow and constructed out of durable polyethylene, meaning they will hold up for decades. Another advantage EZ Ports have when it comes to durability is the single unit one piece construction. Some competitors offer their set ups in modular cubes or sections that need to be coupled together. The problem with these designs is the pressure put on them by bending and conforming to the weight of the hull of a PWC. Over time the links will weaken and eventually snap leading to expensive repairs. EZ Port offers the user the most durable construction while being the easiest to use.

Picking the Right EZ Port for Your Lift

Much like there are different sizes and models of PWC, EZ Port offers three different lifts. The EZ Port MAX 2i, the current industry standard, is designed for larger three seat PWCs and features 12 adjustable rollers that can be shaped to match the hull of a PWC. For smaller 2 seat PWC, the EZ Port VXP is designed to accommodate any brand of shorter PWC with a weight limit of up to 1,300 lbs. The newest offering, the EZ Port 280, will be 80″ wide with an additional 10″ walk space compared to the MAX 2i. While the choice may be a little confusing, you can find out more about the different models here.

If you’re interested in an EZ Port, or have any questions regarding PWC lifts feel free to reach out to our team of experts. We’ll work with you to determine the PWC you own and the right lift that fits your needs. As always, you can also call to talk to your local EZ Dock dealer at (800) 654-8168.

The FAQs of EZ Dock

EZ Dock is one of the best solutions available for waterfront owners. However, after years of traditional steel and wood docks being the most common dock installed people may be a little hesitant to abandon what they know for a product they are uninformed about. With it’s modular-design and worry-free durability, EZ Dock allows a customer to design the perfect dock to fit their needs that will hold up over time. However, when we are talking to customers about EZ Dock, they all tend to ask several of the same questions. Today, we are going to go over some of these to give our customers as much helpful information they can get before they give us a call.

Frequently Asked Questions (FAQs) About EZ Dock

1. How long will it take to get my new dock?

All EZ Dock products offered at Deaton’s Waterfront Services are in-stock and ready to be installed. Most docks can be delivered and installed right away so you can begin enjoying your dock immediately, but in the case that we are out of a product the turnaround time at most can take up to a month.

2. Can you install the dock, or will I have to myself?

Deaton’s Waterfront Services is proud to offer installation for any project our customers see fit. We will give you a quote beforehand to make sure everything is good to go. However in the case of EZ Dock, the installation process is very simple and can be installed within a day. Projects generally require two people for installation.

3. Does EZ Dock require any special tools for installation?

A coupler installation tool (about $40) is the only specialized tool that you will need to assemble the EZ Dock sections. A hammer, ratchet, 15/16″ socket, coupler socket tool (about $5), and a Phillips head screwdriver is all it takes. Consider the fact that the EZ Dock design eliminates up to 60% of the components that other manufactured dock systems need for assembly. It takes only one connection point to make twenty feet of EZ Dock, versus up to seven connection points on ordinary systems. It really is simple and EZ! And, the sections can be assembled on land or in the water.

4. What is inside of EZ Dock?

The EZ Dock one-piece sections contain no fillers or foam for flotation. Their uniquely engineered design forms chambers that displace water and trap air for buoyancy.

5. How hot does EZ Dock get after sitting in the sun all day?

The light color of EZ Dock helps keep the deck surfaces cooler than just about any other deck surface. Shade Structures can always be added to EZ Dock. EZ Dock uses a UV-8 inhibitor in all of its products. These inhibitors range from UV-1 being the lowest protection to UV-8 being the largest protection. We also produce an extremely thick product (about 3/8″ average thickness). The final defense against UV is the light tan color of the dock.

6. How much maintenance does EZ Dock require?

EZ Dock will provide a long-life experience of maintenance-free enjoyment. An occasional wash with soap and water is about all that is required to keep the dock looking new.

7. What anchoring options do I have for my dock?

EZ Dock has several anchoring options including steel pipes, hinge kits, deadweights, and stiff arms. EZ Dock can be anchored in any water condition.

8. Is the deck surface slippery when wet?

The EZ Dock surfaces have a non-skid texture molded into the dock sections. The docks also have grooves to channel the water away. These two items work together to provide safe footing, even when the deck surface is wet.

9. Will the dock damage my boat or personal watercraft?

No. EZ Dock is manufactured out of high-density polyethylene and will not damage any hulls. EZ Dock also manufactures dock bumpers to provide extra security.

10. What gangway options are available?

There are two options when choosing a gangway for EZ Dock: Polyethylene or Aluminum. EZ Dock also offers wooden plank kits.

11. What is the freeboard height for EZ Dock?

Dock sections are 15″ high and will draft about 2″ of water resulting in a really nice 13″ freeboard height.

12. Is EZ Dock environmentally safe?

EZ Dock is just about the most environmentally friendly product that you can put on the water. Our dock sections do not rust, splinter, dissolve, or have any paint or chemicals that can harm the environment.

13. How long has EZ Dock been around?

EZ Dock was started in 1989 by Jack Neitzke and Cliff Vierus. Jack owns a Harbor on the Mississippi near Winoma, MN and had decided to update his entire dock system. As he shopped around and looked at different brands and styles of docks, he felt that everything currently available required too much maintenance, had too many parts, was too difficult to install or change once installed, needed to be taken out in the winter, or was just plain too expensive. Well, Jack explained all this to Cliff, and the two of them set out to design a dock system, which would resolve those issues. In 1991 the first EZ Dock prototype sections were rotational molded and went into use at Jack’s Harbor. Today, those original 78 sections are still in use YEAR ROUND.

14. Is EZ Dock foam-filled? Won’t that cause it to sink?

NO! The Composite Materials Center at Winona State University has performed various tests and measurements on the EZ Dock sections which prove that even if you took a chain saw and opened the dock sections from top to bottom the dock would only lower about 1.6″ further into the water, the interior pylons would each continue to support about 55lbs apiece. This means that the smaller section could continue to support 330 lbs and the larger one would continue to support about 500lbs. Even if you flooded the interior pylons, it still won’t sink under its own load because the density of the polyethylene is less than that of water.

15. Why not use foam? Wouldn’t that be simpler?

While it would have been easier to build a float that contained foam, our advanced structural design has completely eliminated the need for foam. Simply put, our float doesn’t need foam for structural integrity, flotation or for any other reason. Our decision to NOT use foam was based upon the advise we received from water use experts with several different State’s Departments of Natural Resources, and others, like the U.S Army Corps of Engineers. Their concern was for the long range detrimental effects on the environment of foam which could potentially escape if a float is damaged.

16. What happens if my dock becomes damaged?

First, consider that the average wall and deck thickness is anywhere from two to four times thicker than ordinary foam filled floatation devices. So, it’s very unlikely that even under extreme conditions the EZ Dock float/deck would develop a leak. But, if it did, you would simply drain the water and repair the affected area with a heat source like a soldering iron.

17. Aren’t all floating docks tipsy and difficult to walk on, especially in waves?

While there will always be a floating sensation on any floating dock, there are differences between dock designs. The EZ Dock being one long, continuous, float, reduces these effects considerably. Consider the fact that when you walk on a conventional floating dock which uses decking to span between floats, your weight is mostly concentrated on only one float which has about 13 square feet of water-to-float surface contact. But, when you walk on an EZ Dock your weight is distributed over a minimum of 35 square feet of water-to-float contact area. That’s nearly 3 times more area! With regard to wave action, consider that the EZ Dock float/deck section, must because of its length and connection to other sections, rise to the top of waves and therefore bridges them. EZ Dock doesn’t act like a sea serpent trying to be high and low at different points.

18. Can I leave my EZ Dock in during the winter?

Ice, and extreme cold weather do not affect the EZ Dock float/deck. The polyethylene remains flexible to -90 degrees Fahrenheit and the floats are only drafting about 1.5″ of water, meaning that ice pressure will force the float upward, not inward. If you know however that there will be an ice pressure push affecting your installation, we recommend that you remove the pipes or pilings so that the pipes won’t be bent by that force.

19. Is EZ Dock expensive?

It has been said that there are two costs involved with any purchase. The initial cost to buy a product, and the cost of ownership. While there may be other systems available for less money, there are certainly just as many available for more money as well. We never intended for the EZ Dock system to be the cheapest to buy, only the least expensive to own! Our design provides for a long (25 to 30 years expected) and trouble free (rubber couplers provide for flexing and eliminate component fatigue) lifetime of usage.

20. What is the warranty provided by EZ Dock?

EZ Dock provides an 8 year warranty on the floating docks (see warranty). If a dock section should fail due to a manufacturing defect the dock is replaced with a new dock, not a prorated amount but a new replacement dock. EZ Dock provides extended warranty services for up to twenty years based on customer requirements.

While this will answer some questions, we understand that there are many more. If you are interested in EZ Dock and have any questions concerning it, feel free to contact us or give us a call at (800)654-8168.

The King of Ports: Why the EZ Port is the Best

Jet Skis, or Personal Watercraft (PWC), are a great source of fun on the water. To be able to zip across the water at fast speeds on a little watercraft is kind of like racing on a track. You get to feel the cool breeze of the wind while But what happens to the fun when the sun goes down? Then it’s time to begin the process of getting your PWC out of the water. Some people choose to go the hard route and pull their jet skis out of the water onto a trailer after every use. However, smart owners will store them in a PWC lift. There are several models of PWC lift available, but today I’m here to tell you why the EZ Port reigns king.

EZ Ports: The Market Leader

When it comes time to store your EZ Port, why mess with methods that require a lot of work? Nobody wants to spend time cranking up their jet ski onto a trailer or lift after they’ve been in the water all day. With the EZ Port series, getting in and out of the water is as simple as drive on and roll off.

EZ Port VXP

There are two different models of EZ Port: the EZ Port VXP and EZ Port MAX 2i. For smaller 2 seat PWCs, the VXP is recommended. With a capacity rating of up to 1,300 lbs., the EZ Port VXP is great for small models of PWC such as the Yamaha EX, Sea-Doo Spark and Trixx, and the Kawasaki SX-R.

EZ Port VXP

EZ Port VXP features include:

  • (8) moveable rollers which can be positioned in any of the (36) location channels to shape to any hull
  • 1,300 lb. weight capacity designed for smaller 2 seat PWC
  • Built-in bow stop to peacefully prevent overshooting
  • Barefoot friendly with slip-resistant decking texture and UV protection

EZ Port MAX 2i

The EZ Port MAX 2i is the market leader for PWC ports. It is designed for larger vessels of up to 1,800 lbs. With its adjustable rollers, the EZ Port MAX 2i can be adapted to fit any size hull perfectly. They work better with larger 3 seat PWC, but are great for any jet ski model.

EZ Port MAX 2i

EZ Port MAX 2i features include:

  • (8) adjustable rollers that can be adapted to fit any hull shape or size
  • (4) entry rollers designed to allow for easy entry
  • 1,800 lb. weight capacity designed for all PWC including larger 3 seat models
  • Built-in bow stop to peacefully prevent overshooting
  • Barefoot friendly with slip-resistant decking texture and UV protection

EZ Ports Make Getting In and Out Easy

EZ Ports are floating modular PWC lifts that can be installed anywhere there is water. They can be attached to EZ Dock, stand alone with built-in pipe sleeves, or attach to any existing dock with a hinge kit. These universal PWC lifts will transform the way you get out on the water with your jet ski. You can know focus all of your time on the fun you’ll have on the water, without having to worry about getting the jet ski in and out of the water.

If you’re interested in an EZ Port lift, feel free to reach out to us for more information. Our team of experts will assist you with choosing the right lift for your dock and PWC, and make sure you spend more time on the water than off worrying about how to get back on. Feel free to connect with EZ Dock at (800) 654-8168.

3 Benefits To Owning An EZ Port

Zooming around the water on a jet skit is a blast of fun. Jet skis, or personal watercraft (PWC), are small, fun, and can go really fast in the water! So who wouldn’t want to ride or own one? Well, most people are turned off about the process of getting the jet ski to the water, which can be difficult at times. You have to consider proper storage, maintenance, and the process of launching and removing the PWC. Some people might take a look at all this work and think that it outweighs the limited amount of fun you have on the water. Fortunately, there’s a way to remove all the work from the equation and focus more on having fun.

Why Owning a EZ Port Makes Jet Skis Fun

1. Keeping your PWC Safe and Protected

Leaving a Jet Ski in the water tied up to your dock is a bad idea. PWCs are not as large as boats, so therefore they can’t handle nearly as much damage that mother nature tries to throw at it. Leaving your PWC in the water will cause hull damage in one way or another. It can either get beat up or the water will slowly damage your hull by fading away the paint and rusting the metal components. Therefore, the best course of action is to take your jet ski out of the water after every use. You can go through the process of transporting and storing it on a trailer if you like to do things the hard way, but fortunately EZ Dock has an easier solution. Our line of floating PWC lifts, known as the EZ Port series, is the market leader in innovation due to the way they have transformed the process of getting in and out of the water.

EZ Ports

The EZ Port series makes the PWC launching and docking process as easy as sliding on and off into the water. With multiple sets of adjustable rollers, any shape or size of jet ski can be accommodated to safely store. EZ Ports aren’t only compatible with EZ Dock either, they can be standalone or connected to any existing floating dock! With an EZ Port you never have to worry about maintenance on the lift. You will never have parts rusting, snapped cables, or any of the headaches associated with metal PWC lifts.

2. Never Worry About Maintenance or Storage

An EZ Port will be able to sit in the water all year round, even in winter or tropical storm conditions. It will rise and adjust with the changing water levels, so you’ll never have to worry about coming out to find a damaged port. EZ Ports won’t become too much of a hassle over time either. The only maintenance required is to occasionally wash the deck off with a hose and soap or a pressure sprayer. It won’t require painting, replaced parts, or replacing the whole lift due to corrosion.

3. Space is Never an Issue with the Inline Series

Another issue that comes with owning a jet ski is space. While for some space is no issue, having a PWC port in the water is going to take up space, which can start to be too much if more than one PWC is needed to be stored. For those that rent a slip from a marina or community dock, space is very limited. Fortunately with the EZ Port MAX Inline series, multiple ports can be stored within a limited space such as 5′ wide. Removable bow stops can be used to separate the storage areas between the jet skis, so when it comes time to get out on the water simply remove them and go!

Owning an EZ Port can make your time on the water more fun and enjoyable. Spend less time preparing and spend more time enjoying the water while you can! If you are interested in owning an EZ Port, feel free to contact us or give us a call at 800-654-8168 to connect to your local waterfront expert. We will work with you to determine the best lift for your PWC, and make sure that we can get you out on the water in no time!